HTTP Access tab

On this tab, you configure HTTP Access settings for the connector.

Note:

The connector must be connected to a queue.

You must configure HTTP Access settings in order to receive input via an HTTP or HTTPS input connector. The input received via the HTTP(S) input connector can also be passed on to another connector. In this case, you must also configure the HTTP Access settings for that connector.

Setting	Description
HTTP Connector	All HTTP and HTTPS connectors in the Platform are available in this drop-down list. If you are configuring an HTTP or HTTPS connector, you must select that connector. For example, if you are configuring an HTTP connector called HTTP_IN, you must select HTTP_IN from the drop-down list. If you are configuring any other type of connector, you must select the HTTP or HTTPS connector to collect the input from.
URI	The URI of the connector you are configuring.

Example 9

HTTP Access configuration for an HTTP connector and an Internal connector

This example includes one HTTP connector called HTTP_IN and one Internal connector called INTERNAL. The connectors have the HTTP Access configurations shown below.

-	HTTP Connector	URI
HTTP_IN	HTTP_IN	/
INTERNAL	HTTP_IN	/internal

A request sent to www.abc.com/ is received and handled by HTTP_IN.

A request sent to www.abc.com/internal is received by HTTP_IN and forwarded to INTERNAL.